Flux Removal Post Cleaner / Chemical Cleaner

Removes oils, flux, dust, fingerprints and all other debris from printed circuit boards and metal panels.

Designed specifically for printed circuit board cleaning. Remove oils, flux, dust, finger prints and all other debris from printed circuit boards and metal panels with the cleaning system. The Chemical Cleaning System featuring the exclusive oscillating nylon strip brushes and EnviroGold's 816/18.54 de-fluxing chemistry provides the highest quality level in desired metal preparation and cleanliness as verified by independent testing.

This integrated team of machine and chemistry provide the optimum in cleanliness with the virtual elimination of undesired H2O inherent surface tensions that are prevalent in industrial water cleaning applications and systems.

Cleaning Chamber:
The Cleaning Chamber is the first stage of the multiple stage cleaning system utilizing 40 gallon filtered, recirculating thermostatically controlled reservoir. A stainless steel heater is coupled with an over temperature device and a low level safety control. A pump recirculates 3600 gallons per hour of chemical solution through 45 strategically placed "jet spray nozzles". Quadruple baffling at the exit of this chamber assures minimum drag out into the second stage cleaning chamber. Oscillation Brushes in the cleaning chamber ensures proper cleaning of contaminants from the traces and pads of the printed circuit boards. 

Fresh Water Rinse Chamber:
The Fresh Water Rinse Chamber is the second stage of the cleaning system. The chamber contains 30 strategically placed "jet spray nozzles". Water is sprayed on both sides of the panels completely removing all traces of chemical and surface residue. The water is supplied by in house pressure. 

Recirculating Chamber:
The Recirculating Chamber is the third stage of the cleaning system. The chamber utilizes a 12 gallon filtered, recirculating thermostatically controlled reservoir. A stainless steel heater is coupled with an over temperature device and a low level safety control. The pump recirculates 3,600 gallons per hour of solution through 30 strategically placed "jet spray nozzles". Quadruple baffling at the exit of this chamber minimizes solution loss. 

Drying System:
The Drying System is the fourth stage of the cleaning system. The chamber utilizes an efficient, filtered air system that is the key to the drying principle. A high velocity pressure type self cleaning aluminum fan produces 1450 cubic feet of air per minute at 15 inches of static pressure. Ambient air is then fed through six uniquely designed air knives (three top and three bottom) that blast away any trace of moisture, including all through holes. 

Filtration System:
The Filtration System filters the solutions to the Cleaning Chamber and the Recirculating Chamber, utilizing polypropylene canisters for contaminant entrapment. Solutions are returned to the chambers through heavy duty schedule 80 PVC plumbing. All necessary control valves and drains are easily accessible through a convenient snap lock door located on the side of the machine.

Some of the Flux Removal Post Cleaner / Chemical Cleaner's key characteristics are:

  • Superior cleaning for HDI, 6 mil PTH's tented vias and wire bond gold surfaces.
  • Significant improvement in solderability and deoxidation of metal surfaces.
  • Ionic HASL contamination reduction (20X) compared to H2O utilization.
  • USEPA preferred chemical utilization.
  • 100% biodegradable in POTW.