EnviroSense uses cookies and similar technologies on its website.  By continuing your browsing after being presented with the cookie information you consent to such use.

EnviroSense's Universal Cleaning Fixtures are manufactured to be chemically resistant, versatile and extremely strong. Wire type fixtures/baskets are fine for lightweight assemblies but can easily bend and can inhibit spray patterns; due to their being made from screens or meshes. The Universal Fixture’s adjustable slide bar design eliminates shadowing from overlaid screening or fixture supports and it’s titanium and stainless construction make it very rigid.

The fixture’s grooved holding slides use set screws and the “Hold Down” bars are either made with setscrews or latches. This fixture can be used in a vertical or horizontal orientation; such as an Inline cleaner with a horizontal conveyor or vertically in a submersion tank application.

Some of the Universal Cleaning Fixture's key characteristics are:

  • It easily configures for multiple product sizes
  • It is quickly loaded as well as unloaded
  • Can hold single PCA or PCB's up to 36" x 36"
  • Can hold PCA or PCBs to as small as 1" x 1"
  • Made from Titanium and Stainless Steel
  • Will not distort or warp from cleaning temperatures
  • Can be electro-polished if desired
  • It can be adapted to other applications such cleaning individual components

This unit provides an unheated or heated reservoir for chemistry or deionized water. The unit is designed for on demand input/output volumes. A current cleaning system’s wash or rinse chamber’s gpm requirements may exceed the volume production rate of a deionizing system or water purification system.

Dimensions: 24" width x 36" in length x 42' in height
Weight: Empty 175 lbs

Some of the (Un)Heated Auxillary Reservoir's key characteristics are:

  • 1/10th or 1/3rd hp chemically and heat resistant pump
  • 8 gpm to 16 gpm heated or unheated output to rinse or chemical chamber tank(s)
  • 30-gallon polypropylene reservoir
  • 19 amps at 110AC (no hard wiring)
  • Sealed electrical boxes
  • Heated unit has 2 - 1500 KW elements for heating 30 gallons to 140°F, at a 80 degree rise, from 60°F in 15 minutes
  • Solenoids for fluid input and output
  • Low and High Fluid level Floats

V mesh baskets are designed to hold parts horizontal and keep them separated. They are available in a variety of mesh configurations. These V Mesh fixtures can be coated with nylabond to prevent parts from scratching or electro-polished to protect against harsh chemicals during cleaning processes.

Item # Item Name Description Width Length Height Mesh Opening Mesh Material Finish
V-1219-3 V Mesh Baskets V Mesh Cleaning Basket Uncoated 12" 19" 2" 0.317" #3 304/316SST Nylabond White
V-2023-4 V Mesh Baskets V Mesh Cleaning Basket Uncoated 20" 23" 3" 0.317" #3 304/316SST Nylabond White
V-6112-3 V Mesh Baskets V Mesh Cleaning Basket Uncoated 6" 11" 4" 0.203" #4 304/316SST Electropolished
V-8152-3 V Mesh Baskets V Mesh Cleaning Basket Uncoated 8" 15" 2" 0.317" #3 304/316SST Nylabond White
VC-1219-3 V Mesh Baskets V Mesh Cleaning Basket Coated 12" 19" 2" 0.317" #3 304/316SST Electropolished
VC-2023-4 V Mesh Baskets V Mesh Cleaning Basket Coated 20" 23" 3" 0.317" #3 304/316SST Electropolished
VC-6112-3 V Mesh Baskets V Mesh Cleaning Basket Coated 6" 11" 4" 0.203" #4 304/316SST Nylabond White
VC-8152-3 V Mesh Baskets V Mesh Cleaning Basket Coated 8" 15" 2" 0.317" #3 304/316SST Electropolished

NOTE: For a quotation on custom designs and sizes please provide us with your needed dimensions and/or a "rough" sketch.

"Titanium baskets" built to all sizes and shapes. When stainless is not enough, go with Titanium.

NOTE: For a quotation on custom designs and sizes please provide us with your needed dimensions and/or a "rough" sketch.

Tine racks are great for a businesses that does general precision cleaning for a wide range of products. Tine racks can be made to fit into a Kadon basket of any ultrasonic cleaning system. They can hold a variety of objects with varying sizes. We can form pockets made of stainless rod to hold odd shapes. Option of Electro-polished or Nylabond-Coated Finish. Customizable to 8, 10, 11 or 12 rows.

Item # Item Name Rows of Tines Width Length Height Mesh Opening Mesh Material Finish
TWR-6112 Tine Wash Racks 8 Rows on 1.00" Centers 6" 11" 2" .317" #3 304/316 SST Electropolished
TWR-8152 Tine Wash Racks 10 Rows on 1.25" Centers 8" 15" 2" .317" #3 304/316 SST Electropolished
TWR-1219 Tine Wash Racks 12 Rows on 1.50 Centers 12" 19" 3" .317" #3 304/316 SST Electropolished
TWR-2023 Tine Wash Racks 11 Rows on 2.00" Centers 20" 23" 4" .317" #3 304/316 SST Electropolished
TWRC-6112 Tine Wash Racks 8 Rows on 1.00" Centers 6" 11" 2" .317" #3 304/316 SST Nylabond Coated
TWRC-8152 Tine Wash Racks 10 Rows on 1.25" Centers 8" 15" 2" .317" #3 304/316 SST Nylabond Coated
TWRC-1219 Tine Wash Racks 12 Rows on 1.50 Centers 12" 19" 3" .317" #3 304/316 SST Nylabond Coated
TWRC-2023 Tine Wash Racks 11 Rows on 2.00" Centers 20" 23" 4" .317" #3 304/316 SST Nylabond Coated

NOTE: For a quotation on custom designs and sizes please provide us with your needed dimensions and/or a "rough" sketch.

Tables with height adjust option capable of height configurations between 28 - 39 inches. All tables are available in rod top or perforated top. Tables without height adjust option configured at 30 inches high. All tables come standard with our high-quality Electro-polish finish. 

Our stainless steel Electro-polished tables are perfect for any clean-room environment.

Item # Item Name Width Depth Height Lift Range Material Finish
RT2424 Stainless Steel Clean Room Tables 24" 24" 30" N/A 304SST Electropolished
RT3624 Stainless Steel Clean Room Tables 36" 24" 30" N/A 304SST Electropolished
RT4824 Stainless Steel Clean Room Tables 48" 24" 30" N/A 304SST Electropolished
RT6024 Stainless Steel Clean Room Tables 60" 24" 30" N/A 304SST Electropolished
RT7224 Stainless Steel Clean Room Tables 72" 24" 30" N/A 304SST Electropolished
RT8424 Stainless Steel Clean Room Tables 84" 24" 30" N/A 304SST Electropolished
RT2430 Stainless Steel Clean Room Tables 24" 30" 30" N/A 304SST Electropolished
RT3630 Stainless Steel Clean Room Tables 36" 30" 30" N/A 304SST Electropolished
RT4830 Stainless Steel Clean Room Tables 48" 30" 30" N/A 304SST Electropolished
RT6030 Stainless Steel Clean Room Tables 60" 30" 30" N/A 304SST Electropolished
RT7230 Stainless Steel Clean Room Tables 72" 30" 30" N/A 304SST Electropolished
RT8430 Stainless Steel Clean Room Tables 84" 30" 30" N/A 304SST Electropolished
RT2436 Stainless Steel Clean Room Tables 24" 36" 30" N/A 304SST Electropolished
RT3636 Stainless Steel Clean Room Tables 36" 36" 30" N/A 304SST Electropolished
RT4836 Stainless Steel Clean Room Tables 48" 36" 30" N/A 304SST Electropolished
RT6036 Stainless Steel Clean Room Tables 60" 36" 30" N/A 304SST Electropolished
RT7236 Stainless Steel Clean Room Tables 72" 36" 30" N/A 304SST Electropolished
RT8436 Stainless Steel Clean Room Tables 84" 36" 30" N/A 304SST Electropolished
RT2424-HA Stainless Steel Clean Room Tables 24" 24" N/A 28.00-39.00" 304SST Electropolished
RT3624-HA Stainless Steel Clean Room Tables 36" 24" N/A 28.00-39.00" 304SST Electropolished
RT4824-HA Stainless Steel Clean Room Tables 48" 24" N/A 28.00-39.00" 304SST Electropolished
RT6024-HA Stainless Steel Clean Room Tables 60" 24" N/A 28.00-39.00" 304SST Electropolished
RT7224-HA Stainless Steel Clean Room Tables 72" 24" N/A 28.00-39.00" 304SST Electropolished
RT8424-HA Stainless Steel Clean Room Tables 84" 24" N/A 28.00-39.00" 304SST Electropolished
RT2430-HA Stainless Steel Clean Room Tables 24" 30" N/A 28.00-39.00" 304SST Electropolished

NOTE: For a quotation on custom designs and sizes please provide us with your needed dimensions and/or a "rough" sketch.

We design and manufacture racks to hold 100mm 150mm 200mm 300mm cassettes, shipping boxes, and process boxes. Atcor Systems. Many semiconductor companies need security cages, perforated tables, rod top tables, and retical racks - all of which we design and manufacture. We manufacture HeiAdjust stainless tables that have an ergonomic lift system.

NOTE: For a quotation on custom designs and sizes please provide us with your needed dimensions and/or a "rough" sketch.

Stainless wire security cages are the perfect solution for storing your products or equipment in your lab. Each cage has two doors that swing open 270 degrees and clip to the sides. This allows the doors to be kept open and out of the way. Cages come with stainless swiveling and locking casters. Each cage is made with 304 stainless rod and Electropolished for enhanced corrosive resistances.

Item # Item Name Width Length Height Shelves Material Finish
SC-36-42 Stainless Steel Wire Security Cage 24.00" 36.00" 42.00" 1 304SST Electropolished
SC-48-42 Stainless Steel Wire Security Cage 24.00" 48.00" 42.00" 1 304SST Electropolished
SC-48-60 Stainless Steel Wire Security Cage 24.00" 48.00" 60.00" 2 304SST Electropolished
SC-48-72 Stainless Steel Wire Security Cage 30.00" 48.00" 72.00" 3 304SST Electropolished
SC-72-72 Stainless Steel Wire Security Cage 24.00" 72.00" 72.00" 3 304SST Electropolished

NOTE: For a quotation on custom designs and sizes please provide us with your needed dimensions and/or a "rough" sketch.

Pocketed Precision Baskets have handles and are stackable. Baskets with hinged lids have safety latches. These baskets are available in a variety of mesh sizes and can be Nylabond coated or electro-polished. The pockets can be set to any desired sizings.

NOTE: For a quotation on custom designs and sizes please provide us with your needed dimensions and/or a "rough" sketch.

Our products will safely protect delicate optical parts through cleaning operations. Each rack is Nylabond coated to protect optic from micro cracking. Optic racks are designed to thoroughly clean and dry all contaminants off the optic. Racks are stainless steel with 3 or 4 point optic contact points.

tem # Item Name Capacity Diameter Width Length Height Material Finish
75-OWR Optics Wash Racks 125 Units 0.75" 8" 15" 1.5" 304/316 SST Nylabond White
1-OWR Optics Wash Racks 125 Units 1.00" 8" 15" 1.5" 304/316 SST Nylabond White
125-OWR Optics Wash Racks 100 Units 1.25" 8" 15" 1.5" 304/316 SST Nylabond White
150-OWR Optics Wash Racks 75 Units 1.50" 8" 15" 1.5" 304/316 SST Nylabond White
175-OWR Optics Wash Racks 75 Units 1.75" 8" 15" 2" 304/316 SST Nylabond White
2-OWR Optics Wash Racks 75 Units 2.00" 8" 15" 2" 304/316 SST Nylabond White
225-OWR Optics Wash Racks 50 Units 2.25" 8" 15" 2" 304/316 SST Nylabond White
250-OWR Optics Wash Racks 50 Units 2.50" 8" 15" 2" 304/316 SST Nylabond White
275-OWR Optics Wash Racks 50 Units 2.75" 8" 15" 2" 304/316 SST Nylabond White
3-OWR Optics Wash Racks 50 Units 3.00" 8" 15" 2" 304/316 SST Nylabond White
325-OWR Optics Wash Racks 50 Units 3.25" 8" 15" 2.25" 304/316 SST Nylabond White
350-OWR Optics Wash Racks 25 Units 3.50" 8" 15" 2.25" 304/316 SST Nylabond White
375-OWR Optics Wash Racks 25 Units 3.75" 8" 15" 2.25" 304/316 SST Nylabond White
4-OWR Optics Wash Racks 25 Units 4.00" 8" 15" 3" 304/316 SST Nylabond White
425-OWR Optics Wash Racks 25 Units 4.25" 8" 15" 3" 304/316 SST Nylabond White
450-OWR Optics Wash Racks 25 Units 4.50" 8" 15" 3" 304/316 SST Nylabond White
475-OWR Optics Wash Racks 25 Units 4.75" 8" 15" 4" 304/316 SST Nylabond White
5-OWR Optics Wash Racks 25 Units 5.00" 8" 15" 4" 304/316 SST Nylabond White
525-OWR Optics Wash Racks 25 Units 5.25" 8" 15" 4" 304/316 SST Nylabond White
550-OWR Optics Wash Racks 25 Units 5.50" 8" 15" 4" 304/316 SST Nylabond White
575-OWR Optics Wash Racks 25 Units 5.75" 8" 15" 5" 304/316 SST Nylabond White
6-OWR Optics Wash Racks 25 Units 6.00" 8" 15" 5" 304/316 SST Nylabond White
625-OWR Optics Wash Racks 25 Units 6.25" 8" 15" 5" 304/316 SST Nylabond White
650-OWR Optics Wash Racks 25 Units 6.50" 8" 15" 5" 304/316 SST Nylabond White
675-OWR Optics Wash Racks 25 Units 6.75" 8" 15" 5" 304/316 SST Nylabond White

NOTE: For a quotation on custom designs and sizes please provide us with your needed dimensions and/or a "rough" sketch.

We are capable of producing any type of high-quality rack or storage device for your ultrasonic and precision cleaning needs. Each basket is buffed and Electro-polished to enhance its corrosive resistance. Precision Baskets have handles and are stackable. Baskets with hinged lids have safety latches. 

We also have a wide range of sizes on our spin drying baskets. 

Spin dry baskets for Desco, Atotech, New Holldand, and Nobles. These baskets are 304 stainless with mesh or perforated. Custom sizes available.

Item # Item Name Diameter Height Mesh Opening Mesh Size Material
SBN-1175-12 Spin Dryer Baskets 11.75 12" #16" 0.035 304SST
SBN-12-12 Spin Dryer Baskets 12 12" #16" 0.035 304SST
SBN-18-18 Spin Dryer Baskets 18 18" #16" 0.035 304SST
SBNH-6-6 Spin Dryer Baskets 6 6" #16" 0.035 304SST
SBNH-1175-1175 Spin Dryer Baskets 11.75 12.5" #16" 0.035 304SST
SBNH-1775-18 Spin Dryer Baskets 18 17.75" #16" 0.035 304SST
SBNH-1775-24 Spin Dryer Baskets 24 17.75" #16" 0.062 304SST

NOTE: For a quotation on custom designs and sizes please provide us with your needed dimensions and/or a "rough" sketch.

Electronics manufactures have a wide range of products - we work directly with each manufacturer to design a rack that will perfectly meet your need. Pocketed Inline cleaning baskets for small and large capacity PC boards. These baskets will protect the components on the board from getting caught in the chain belts. Latching hinging and removable lids. Stainless steel. We also design and manufacture custom fixtures for odd shaped electronic devices. (Inline Cleaning Stainless Baskets)

NOTE: For a quotation on custom designs and sizes please provide us with your needed dimensions and/or a "rough" sketch.

We have a wide array of storage and cleaning devices designed to accommodate any need. Seagate, Western Digital, Hitachi. Whether it's disk drives or microchips these fixtures will keep your products safe for cleaning. HGA wash fixtures for production and rework. All in electropolished 316 stainless to reduce particle count. 

We work directly with equipment manufacturers to deliver you the best possible equipment for your cleaning needs and optimize your process. We produce racks for any of the disc drive components. HSA, Spacer Ring, Base Castings, Top Covers, Screws, Kit racks for identity and rework.

NOTE: For a quotation on custom designs and sizes please provide us with your needed dimensions and/or a "rough" sketch.

These are designed for the many different Ultrasonic cleaning systems. Branson, Crest, CAE, Infinity, Blackstone to name a few. Auto lift, manual, or rotation. Lean-Jet, EVD systems. Stainless KaDon replacement baskets. Carriers can be designed for multi-level cleaning. This allows for different products being cleaned at the same time. Carriers can be designed for robotic lift or manual lift. Robotic lift carriers are designed for constant use and manual carriers are designed to be ergonomic as well as light. 

Inserts can be made to be quarter size or half of full size. Rotation carriers and inserts can also be designed.

Item # Item Name Tank Size Material Finish
C1014 Cleaning System Carriers 10.00" x 14.00" 304/316 SST Electropolished
C1218 Cleaning System Carriers 12.00" x 18.00" 304/316 SST Electropolished
C1622 Cleaning System Carriers 16.00" x 22.00" 304/316 SST Electropolished
C1826 Cleaning System Carriers 18.00" x 26.00" 304/316 SST Electropolished
C2446 Cleaning System Carriers 24.00" x 46.00" 304/316 SST Electropolished
BR1418 Cleaning System Carriers 14.00" x 18.00" 304/316 SST Electropolished
BR1822 Cleaning System Carriers 18.00" x 22.00" 304/316 SST Electropolished
BR1830 Cleaning System Carriers 18.00" x 30.00" 304/316 SST Electropolished

NOTE: For a quotation on custom designs and sizes please provide us with your needed dimensions and/or a "rough" sketch.

We have designed and manufactured many different cleaning racks for the medical and BioMed field. Implant cleaning racks, process racks, autoclave baskets. All racks are designed to optimize production and cleaning. Stainless carts with slide in and out baskets to house products and tools in the BioMed Fab. 

Racks for implants include: tibiae, stems, shells, modular heads, stints, bone screws, dental implants and pace makers. Besides our racks for medical implants, Artcraft manufactures racks for vials, syringes, test tubes, and filler pump racks.

NOTE: For a quotation on custom designs and sizes please provide us with your needed dimensions and/or a "rough" sketch.

We design and manufacture racks for many automotive components - from engine components and mirrors to transmission parts and beyond. Some of our customers include Cummins, Delphi, Ford and GM. We produce high-quality racks specifically designed for your precision. Automotive Cleaning needs. Our welded frames are expertly-designed for maximum strength to absorb thermal expansion that occurs under extreme temperatures. 

Our Electro-polish finish also enhances the product's resistance to corrosion or degradation from harsh cleaning chemicals.

Item # Item Name Width Length Depth Mesh Opening Mesh Handle Finish
B612-2 Bulk Product Cleaning Baskets 6.00" 12.00" 3.50" 0.437" #2 10 Electropolished
B612-4 Bulk Product Cleaning Baskets 6.00" 12.00" 3.50" 0.218" #4 10 Electropolished
B916-2 Bulk Product Cleaning Baskets 9.00" 16.00" 3.50" 0.437" #2 10 Electropolished
B916-4 Bulk Product Cleaning Baskets 9.00" 16.00" 3.50" 0.218" #4 10 Electropolished
B1222-2 Bulk Product Cleaning Baskets 12.00" 22.00" 6.00" 0.437" #2 12 Electropolished
B1222-4 Bulk Product Cleaning Baskets 12.00" 22.00" 6.00" 0.218" #4 12 Electropolished
B1524-2 Bulk Product Cleaning Baskets 15.00" 24.00" 6.00" 0.437" #2 12 Electropolished
B1524-4 Bulk Product Cleaning Baskets 15.00" 24.00" 6.00" 0.218" #4 12 Electropolished
B612-2-C Bulk Product Cleaning Baskets 6.00" 12.00" 3.50" 0.437" #2 10 Nylabond White
B612-4-C Bulk Product Cleaning Baskets 6.00" 12.00" 3.50" 0.218" #4 10 Nylabond White
B916-2-C Bulk Product Cleaning Baskets 9.00" 16.00" 3.50" 0.437" #2 10 Nylabond White
B916-4-C Bulk Product Cleaning Baskets 9.00" 16.00" 3.50" 0.218" #4 10 Nylabond White
B1222-2-C Bulk Product Cleaning Baskets 12.00" 22.00" 6.00" 0.437" #2 12 Nylabond White
B1222-4-C Bulk Product Cleaning Baskets 12.00" 22.00" 6.00" 0.218" #4 12 Nylabond White
B1524-2-C Bulk Product Cleaning Baskets 15.00" 24.00" 6.00" 0.437" #2 12 Nylabond White
B1524-4-C Bulk Product Cleaning Baskets 15.00" 24.00" 6.00" 0.218" #4 12 Nylabond White

NOTE: For a quotation on custom designs and sizes please provide us with your needed dimensions and/or a "rough" sketch.

Stainless beaker baskets. A perfect basket for cleaning small parts in a beaker or small ultrasonic unit. Baskets are constructed with 1/8" diameter rod with #24 mesh. #24 mesh has an .027" opening. Handle is removable to allow baskets to be easily stored. Each basket is buffed and electropolished to enhance corrosive resistance. Baskets will accept an optional latching lid.

Part Number Height Diameter
R50-24 2.00" 1.65"
R100-24 2.75" 2.55"
R250-24 3.00" 2.85"
R400-24 3.50" 3.45"
R500-24 3.75" 3.75"
R600-24 4.25" 3.85"
R1000-24 5.00" 4.50"
R2000-24 6.40" 5.81"

 

Precision stainless baskets. A perfect basket for cleaning small parts in an ultrasonic unit. Baskets are constructed with 1/8" diameter rod with #4, #10 or #24 mesh. Baskets come with or without a latching lid. Each basket is buffed and electropolished to enhance corrosive resistance.

Part Number Length Width Height Lid
351BL-24 5.00" 3.00" 1.00" Yes
351BL-10 5.00" 3.00" 1.00" Yes
351BL-4 5.00" 3.00" 1.00" Yes
351B-24 5.00" 3.00" 1.00"  
351B-10 5.00" 3.00" 1.00"  
351B-4 5.00" 3.00" 1.00"  
572BL-24 7.00" 5.00" 2.00" Yes
572BL-10 7.00" 5.00" 2.00" Yes
572BL-4 7.00" 5.00" 2.00" Yes
572B-24 7.00" 5.00" 2.00"  
572B-10 7.00" 5.00" 2.00"  
572B-4 7.00" 5.00" 2.00"  
793BL-24 9.00" 7.00" 3.00" Yes
793BL-10 9.00" 7.00" 3.00" Yes
793BL-4 9.00" 7.00" 3.00" Yes
793B-24 9.00" 7.00" 3.00"  
793B-10 9.00" 7.00" 3.00"  
793B-4 9.00" 7.00" 3.00"  

 

Inline stainless baskets. A perfect basket for cleaning small and large PC boards in an inline cleaning system unit. Baskets are constructed with 3/16" diameter rod with #3 mesh. Baskets come with a removable lid.

Part Number Length Width Height
IN-15201 20.00" 15.00" 1.00"
IN-15202 20.00" 15.00" 2.00"
IN-15203 20.00" 15.00" 3.00"

 

Bulk stainless baskets. These baskets are designed to be used in most cleaning systems. Baskets are constructed with 1/4" diameter rod with #4 or #2 mesh. Each basket is buffed and electropolished to enhance its corrosive resistance.

Part Number Length Width Height
B612-2 12.00" 6.00" 3.50"
B612-4 12.00" 6.00" 3.50"
B916-2 16.00" 9.00" 3.50"
B916-4 16.00" 9.00" 3.50"
B1222-2 22.00" 12.00" 6.00"
B1222-4 22.00" 12.00" 6.00"
B1524-2 24.00" 15.00" 6.00"
B1524-4 24.00" 15.00" 6.00"